الأربعاء، 29 نوفمبر 2017

#course:Piping and Pipelines network design, optimization and simulation

يتشرف المركز الدولي للتدريب والاستشارات ان يقدم لكم برامجه المتخصصة في
اقوي الدورات التدريبيه التي يحتاجها سوق العمل و التي هي الأكثر طلبا في المجالات المختلفة والشاملة....



course:#Piping and Pipelines network design optimization and simulation

Course Objectives:

·         The pipeline networks expanded rapidly all over the world when it became apparent that pipelines are an efficient, economic way to move oil, gas, and petroleum products to consumers. The large discoveries of oil and gas, many of them in remote areas of little local demand, promoted this pipeline expansion. More challenges face the pipeline industry. So, good understanding of pipeline systems will help tackling these challenges.
·         This course deals with the design, construction of both gas and liquid pipeline systems. An overview of pipeline industry is discussed.  Participants will have acquire and/or consolidate the essential knowledge and skills to design and construct pipelines. This will allow them to contribute to cost effective, safe and sound-design of pipelines.
·          Pipelines network design
·         Analyses and optimize network performance through computer simulation
·         Simulate  the pipelines , performance  and troubleshooting
·         Simulate hydrate formation , slug problem
·         Analyses  the flow equipments  operation  ( pumps , compressor , fitting , valves ) by simulation softwares
·          

Who Should Attend:

·         Managers, engineers, operators, supervisors, inspectors, equipment suppliers, or those who wish to be familiar with pipeline systems
·         Operations personnel who are involved in the use of pipelines either liquid or gases or network system
·         Design engineers who are involved in the design, modification or repair of pipelines or network system
·         Maintenance personnel who are involved in or responsible for the routine maintenance of the network  system
·         Safety engineers who are involved in the continuing assessment of the pipelines system as a safe means of transportation

·        Environmental engineers


Course Contents and agenda: 
  •         Pipeline Design
  •   Design Sequence of P/L network
  •      Evaluation of fluid availability
  •      Estimate of fluid demands.
  •      The Basic design of P/L network.
  •      The Economics of P/L system.
  •   Fluid properties affecting flow
  •        Design of Gas Pipelines
  •   Calculation of compressibility factor.
  •   Properties of gas mixtures.
  •   Pressure drop in gas pipeline due to friction.
  •   Gas pipeline flow equations.
  •   Friction factor and transmission factor.
  •   Gas Pipeline velocity and erosional velocity calculation.
  •    Increasing gas throughput by looping and booster compressor.
  •   Calculation of pipe maximum allowable operating pressure.
  •    Fundamental Calculations of gas compressor stations.


كما يقدم المركز باقة من أحدث البرامج التدريبية وورش العمل في المجالات التالية:

خدمة عملاء وتسويق و مبيعات ومالية ومشتريات و مخازن و دورات هندسية وامن وسلامة
موارد بشرية وإدارة و قيادة  و دورات قانونية وسكرتارية وعلاقات عامة



لمعرفة المحتوى العلمى والتكلفة والمواعيد الاخرى للدورة فى انتظار تواصلكم 


 Bassma genedy

Training coordinator

:bassma@itcegy.comE-Mail

00201113010104Mobile:












ليست هناك تعليقات:

إرسال تعليق