#course# Understanding and Interpreting Technical Drawings (P&ID, PFD and UFD) and Documentation

يتشرف المركز الدولى للتدريب والاستشارات ان يقدم لسيادتكم خطة عام 2018 فى مختلف المجالات الادارية والفنية ( املين دائما ان نكون عند حسن ظن سيادتكم فى تقديم الافضل وكل ما هو جديد )

#course# Understanding and Interpreting Technical Drawings (P&ID, PFD and UFD) and Documentation  

Course Objective

Upon completion of this course, participant will be to gain:

1.      Understand Process Plant Drawings

2.      Understand and recognize on process equipments drawing legends

3.      Understand Mechanical Flow Drawings

4.      Understand Process Flow Drawings

5.      Recognize Process and Instrument Drawings P&ID

6.      Understand Instrumentation  Loop Drawings and Isometric Drawings

7.      Understand interlock system and logic diagram

8.    Fundamental of process Control system  and how  control loops are in drawing

9.    Understand and read documents to facilitate the analysis of emergency situations, and help with the assessment of safety, environmental and regulatory compliance issues such as Process Hazards Analysis / HAZOP studies.

WHO SHOULD ATTEND?

Ø  People who are making day to day decisions regarding operation, design, and economics of processing plants;

1.       Operations personnel,

2.      Operation Supervisors,

3.      Maintenance personnel,

4.      Maintenance Supervisors,

5.      Senior Plant Supervisors,

6.      Operations Engineers

7.      Process Support Engineers,

8.      Design Engineers,

9.      Mechanical engineers

10.  Mechanical technicians

Ø  Ideal for veterans and those with years of experience who want to review or broaden their understanding in Processing Plant Operations.

Ø  Other professionals who desire a better understanding of subject

Course contents

Day 1  

·         Types of Process Plant Drawings

·         SYMBOLS AND

·         ABBREVIATIONS

·         Letters at Individual Valves Designations

·         Piping Abbreviations and specification

·         Miscellaneous Designations

·         Legends and symbols

Day 2  

·         Utility Services Abbreviations

·         Instrumentation identifications

·         equipment abbreviations (codes)

·         fluid abbreviations

·          Painting, insulation and heat tracing designations.

·         Main Equipment & Package Unit

·         Mechanical Flow Drawings

Day 3  

·         Process Flow Drawings

·         Process and Instrument Drawings

Day 4  

·         Instrument Loop Drawings

·         Isometric Drawings

·         Logic Diagrams

Day 5  

·         Process datasheet

·         Equipments datasheet

·         Basic of control system

·         Interlock  system and logic diagram

·         Fundamental of HAZOP loops creation and study

Course Duration: 5 Days

 Bassma genedy

Training coordinator

:bassma@itcegy.comE-Mail

00201113010104Mobile:

LinkedIn

Twitter

#course#Utilities and Environment protection in Refineries

يتشرف المركز الدولى للتدريب والاستشارات ان يقدم لسيادتكم خطة عام 2018 فى مختلف المجالات الادارية والفنية ( املين دائما ان نكون عند حسن ظن سيادتكم فى تقديم الافضل وكل ما هو جديد )

 #course#Utilities and Environment protection in Refineries

 

Introduction

The success of every company depends of each employee's understanding of the key business components. Employee training and development will unlock the companies' profitability and reliability. When people, processes and technology work together as a team developing practical solutions, companies can maximize profitability and assets in a sustainable manner. Training and development is an investment in future success – give yourself and your employees the keys to success

COURSE OBJECTIVE:

This course presents a detailed overview of petroleum refinery processes, wastes, Management of Refinery Waste, Pollution Prevention Options and treatment technology and final disposal methods

WHO SHOULD ATTEND?

New process engineers, process supervisor, and new technicians in relation to the important features of storage and loading facilities

COURSE DURATION:

4- 5   days

Day 1

       Introduction

       Petroleum Composition

·         Elemental Composition

·         Chemical Composition

·         Composition by Volatility

·         Composition by Fractionation

Properties

·         Density and Specific Gravity

·         Elemental (Ultimate) Analysis

Refinery Products and By-Products

·         Liquefied Petroleum Gas

·         Naphtha, Gasoline, and Solvents

·         Kerosene and Diesel Fuel

·         Fuel Oil

·         Lubricating Oil

·         White Oil, Insulating Oil, and Insecticides

·         Grease

·         Wax

·         Asphalt

·         Coke

Day 2

Hydrocarbon Waste

·         A. Oily waste

·         B. Sludge

Refinery Wastes

Process Wastes

·         Desalting

·         Distillation

·         Visbreaking and Coking

·         Fluid Catalytic Cracking

·         Hydrocracking and Hydrotreating

·         Alkylation and Polymerization

·         Catalytic Reforming

·         Isomerization

·         Deasphalting and Dewaxing

Day 3

·         Residual Oil Storage Tank Sludge

Physical Chemical Properties

Residual Hydrocarbon Waste Composition

Entry into the Environment

·         Storage and Handling of Petroleum

·         Products

·         Release into the Environment

Toxicity

·         Lower-Boiling Constituents

·         Higher-Boiling Constituents

·         Total Petroleum Hydrocarbons

·         Wastewater

Day 4

Management of Refinery Waste

Pollution Prevention

·         Refinery Wastes and Treatment

·         Air Emissions

·         Wastewater and Treatment

·         Other Waste and Treatment

Pollution Prevention Options

·         Recycling

·         Treatment Options

·         Adoption of Pollution Reduction Options

Day 5

Refinery Outlook

·         Hazardous Waste Regulations

·         Regulatory Background

·         Requirements

Disposal methods 

 Bassma genedy

Training coordinator

:bassma@itcegy.comE-Mail

00201113010104Mobile:

LinkedIn

Twitter

#course #Utilities in Process Plants

يتشرف المركز الدولى للتدريب والاستشارات ان يقدم لسيادتكم خطة عام 2018 فى مختلف المجالات الادارية والفنية ( املين دائما ان نكون عند حسن ظن سيادتكم فى تقديم الافضل وكل ما هو جديد )

#course #Utilities in Process Plants#

  Course objectives :

 Utilities systems are vital services to the operation of process plants. This course provides a comprehensive introduction to the utilities in the process industry. The course will present a thorough understanding of the different utilities systems, , air systems, nitrogen production, water systems, fuel systems and heating systems. The course addresses the most common technology in each system including an overview of the major equipment specific to each system and the options offered by recent technological advances. The course covers the available technologies with the proposed design improvement through various case studies.

Course contents :

        Apply skills and knowledge on utilities in process plants

·         Discuss air compressors and air systems and list the typical air supply systems and air dryers in process plants

·         List the various types of nitrogen, inert gas generation, cryogenic nitrogen generation and nitrogen/inert gas requirements

·         Explain pressure-swing adsorption nitrogen generation

·         Discuss the properties of water chemistry, potable and industrial water treatment, thermal distillation and waste water treatment

·         Carryout fire water systems, fuel gas systems and flare systems

WHO SHOULD ATTEND?

1.      Operation Supervisors,

2.      1st Line Maintenance personnel,

3.      Maintenance Supervisors,

4.      Senior Plant Supervisors,

5.      Operations Engineers

6.      Process Support Engineers,

7.      Design Engineers,

8.      Process and Production staff,

9.      . Projects and Constructions Engineers

10. Utility engineers

11. Utility operation staff

Course Duration:  5 Days

نقوم بتنفيذ دوراتنا بجميع انحاء العالم العربي والاجنبى
الفروع الخاصة بنا ( الامارات العربية المتحدة – جمهورية مصر العربية – قطر – تركيا – ماليزيا )
تعقد الدورات في الدول الاتية:
(دبي- تركيا- ماليزيا - مصر (القاهرة - الاسكندرية - شرم الشيخ) - فيينا – الاردن
- المغرب - لندن - قطر- النمسا- مدريد - باريس- تونس - لبنان - جاكرتا - السعودية (الرياض - جدة - الدمام - الخبر) - نيويورك - واشنطن - سويسرا)
ويمكننا عقد الدورات حسب التاريخ والدولة المناسبة لسيادتكم ايضا

 Bassma genedy

Training coordinator

:bassma@itcegy.comE-Mail

00201113010104Mobile:

LinkedIn

Twitter